The BC-146.565 DF Antenna
BC-146.565 Owner’s Manual (PDF)
The RDF Antennas BC-146.565 DF System showing optional compatible equipment
The BC-146.565 Antenna is a 3-element Yagi beam antenna. It is specifically designed to be a hand held, fold up, portable radio direction finding antenna for use on 146.565 MHz. It is designed to be compatible with a wide range of equipment, including both the older and newer models of the L-Per, the MK-4 Sniffer (shown below), and any hand held receivers (receivers may require an antennuator).
Designed in consultation with industry experts including Joe Moell, K0OV, author of “Radio Direction Finding Simplified”, and Bob Thornburg, a noted RF engineer and transmitter hunter, we utilize the EZNEC 4.0 antenna program to model and optimize the antenna then tune it using an antenna analyzer. The antenna design was tested at NASA’s Jet Propulsion Laboratory in Pasadena, California to verify antenna characteristics and ensure design specifications were met.
Technical and Design Requirements
The BC-146.565 Antenna’s EZNEC 4.0 Antenna Pattern as designed.
Our technical design specifications for each antenna are strictly adhered to*. Each antenna must:
- Fold up neatly for storage
- Have a good front-to-back ratio
- Have no side lobes at resonance
- Have good forward gain
- Be specifically resonant at 146.565 MHz
- Have a standing wave ratio (SWR) of less than 1:1.2 at 146.565 MHz
- An X-factor of 1 or less
- Have an impedance of 50 ohms + or – 2 ohms at 146.565 MHz.
- Have a balanced feed point
*** Due to manufacturing delays caused by our move, we are not currently accepting new orders. Please check back later. ***
*Since all our products are custom-made to your exact specifications, please allow a few days for us to design and build your antenna.
BC-146.565 Antenna unfolded
BC-146.565 Folded